Center limb transformer core cutting machine
Center limb core cutting machine is especially designed for cutting center limbs of the power transformer core.
This machine is PLC control, touch screen operation. If the transformer core lamination length 200~400mm, it can cut 40 pieces per one minute.
Detailed introduction
Structure of transformer core center limbs cutting machineThis machine is especially designed for cutting center limbs of the power transformer core.
This machine is PLC control, touch screen operation. If the transformer core lamination length 200~400mm, it can cut 40 pieces per one minute.
1 Inverter-controlled decoiler
2. High speed feeding machine
3.Cutting Device (two V-shape heads)
4. Online hole punching device
5 Control system PLC
6. Belt transmitting table
7. Stacking table
Main technical data :
No. |
Item |
Data |
1 |
Model Code |
Model:JN-300/400/500/800-Z |
2 |
CRGO thickness |
0.23-0.6mm |
3 |
CRGO coil width |
40-800mm |
4 |
CRGO strip Length |
4m |
5 |
Cutting length |
200-90,000,000mm |
6 |
Cut-to-length tolerance |
+/-0.02mm |
7 |
Cutting angle tolerance |
+/-0.03° |
8 |
Burr height |
Less than 0.02mm |
9 |
Feeding speed |
Max. 100m/min |
10 |
Cutting blade |
Carbide alloy |
11 |
Servo motors |
China famous brand/imported brand |
Online order
Could not find any data!
You may also be interested in these...
Distributed gap wound core forming machine
Full automatic Unicore machine distributed gap core forming machines also called 3D unicore machine for cutting transformer core cut a variety of small medium and large transformer core in open U type...
CRGO Slitting machine
Slitting machine,the configuration of the sensor, length measuring device, intelligent digital display meter, the cutting length that required can be preset,(unit precision:0.1m) sound alarm when reac...
Metal Cutting machine
this machine is mainly used for cutting metal coil leveling into strip and then cut to laminations.
The cutting material: silicon steel, CRGO, cold roll steel, galvanized steel, PPGI, SPTE, Tin pl...